Problems after replacing blend door actuator
Hi everyone, I have a 2003 mercury grand marquis Ls
Im a new member I hope I'm doing this right Its been awhile. I replaced my blend door actuator went through the glove box, there were only 2 screws on the old one so someone has been in there before. So I loosened up the right side of the dash pulled part way out hopefully for more room. Anyway I installed new actuator put everything back together and no joy. Not only did the actuator not work neither did the power windows no sound from the radio and the power steering is now hard at low speed and seems to be easier at higher speed. I've searched forums and videos with no real solutions. We had a someone come out he managed to get power windows working not sound or power steering Also I cant seem to find a decent wiring diagram
any help would be appreciated.
Paul M
Im a new member I hope I'm doing this right Its been awhile. I replaced my blend door actuator went through the glove box, there were only 2 screws on the old one so someone has been in there before. So I loosened up the right side of the dash pulled part way out hopefully for more room. Anyway I installed new actuator put everything back together and no joy. Not only did the actuator not work neither did the power windows no sound from the radio and the power steering is now hard at low speed and seems to be easier at higher speed. I've searched forums and videos with no real solutions. We had a someone come out he managed to get power windows working not sound or power steering Also I cant seem to find a decent wiring diagram
any help would be appreciated.
Paul M
Thread
Thread Starter
Forum
Replies
Last Post



