Howdy fellas,

I have not posted up in 9 months here but here I am again :P. I would like to get more involved.

I parked my "Marauder" wanna be last Fall because I thought I had a leaking front pump seal in the 4R70W in my car. After a ephiphanal dream I discovered it was the tail shaft housings bolts that were loose and leaking horribly, so here I am, again.

I saw this mod over at Vic Muscle http://www.mitchsplace.com/crownvicm...vmattz_kn.html
and was wondering if anyone could share more detail on where to find these parts and any tips on how to make it?

My car is a 95 Marquis GS 4.6L.....has Bosch Ignition, good wires (cant remember) Iridium plugs, K&N air filter, true duals w/dual CATs, X pipe and Flowmaster 40's.

MB Old School American Torque Thrust wheels w/some strange backspacing to clear the capilers...

I have put about 40k on this Merc since these mods...it sounds amazing and runs hard too. Was the quentisential "grandma's" car", garaged, old lady driven....

 

I just put one on my 2001 GMQ LSE and am running a SCT X4 hand held programmer...HAULS ***....