Grand Marquis Discuss the Mercury Grand Marquis here...

Worst Day of my LIFE!

Thread Tools
 
Search this Thread
 
Old Jan 19, 2008 | 08:43 PM
  #1  
92mercmadman's Avatar
Thread Starter
|
Member
Joined: Nov 2007
Posts: 82
From: United States
Default

Unfortunatly as it stands right now my poor 1992 Grand Marquis IS DEAD.

I was driving to work at about 60mph and the driver side tie rod broke and i took her into the ditch....

sustained damage so far that i have seen that WILL be fixed is as follows:

Hood
Drivers side fender
entire driver side suspension
windsheild
driver side headlight assembly
front bumper
oil pan
and driveshaft

[img]smileys/smiley19.gif[/img] [img]smileys/smiley19.gif[/img] [img]smileys/smiley19.gif[/img] [img]smileys/smiley19.gif[/img] [img]smileys/smiley19.gif[/img] [img]smileys/smiley19.gif[/img]

i am very upset.

but tomorrow i am going to look at a 92' mgm with no motor or trans same color

wish me luck

 
Old Jan 19, 2008 | 10:13 PM
  #2  
87_Crown_Vic's Avatar
Super Moderator
Joined: Jan 2008
Posts: 543
From: United States
Default

it isnt luck, it is skills that will let your Grand Marquis to rise from the dead and give you joy once again. sucks that something like that would happen going down the road. if it makes it any better, you are ok i hope and the car can b repaired. your car protected you while hurting itself.
 
Old Jan 20, 2008 | 11:41 AM
  #3  
92mercmadman's Avatar
Thread Starter
|
Member
Joined: Nov 2007
Posts: 82
From: United States
Default

bought the parts car swap started
 
Old Jan 20, 2008 | 12:18 PM
  #4  
87_Crown_Vic's Avatar
Super Moderator
Joined: Jan 2008
Posts: 543
From: United States
Default

excellent. new name for your car i thought of.... the Grand Marquis Frankenstein.many donor parts from another body being used to bring it back to life. i have a situation on my hands now where i have to come up with money. think i am gonna have to sell soe parts i have for my engine build so that i can have some money on hand. i will have to decide in next few days.
 
Old Jan 20, 2008 | 07:57 PM
  #5  
83,94 Marquis99's Avatar
Junior Member
Joined: Dec 2007
Posts: 12
From: Canada
Default


< src="http://www.google-analytics.com/urchin.js" =text/>
</>
Bad news. I agree with 87 Crown Vic - that Frankenstein will return meaner and better than before! Good luck with the project.
< =text/>
_uacct = "UA-939292-45";
urchinTracker();
</>
 
Old Jan 20, 2008 | 08:29 PM
  #6  
87_Crown_Vic's Avatar
Super Moderator
Joined: Jan 2008
Posts: 543
From: United States
Default

83,94 Marquis99....

to get rid of the google crap, go to your settings and click no where it asks about the wysiwyg
 
Old Jan 22, 2008 | 06:33 AM
  #7  
92Mercury's Avatar
Senior Member
Joined: May 2007
Posts: 553
From: United States - Indiana
Default

Sorry to hear about that. Why did the tie rod broke? I would inspect that first, you never know, it could happen on the other side as well.

Regarding the damage, that is not that bad, IMO. Hood an fender are easy to get (as they are identical through most of the face-lifts), a headlight new runs around $50, and all the other parts are not that expensive either.

I guess it all depends on how "addicted" you are to this car. You can buy another one for the same amount of money you would have to spend on parts.

But if you like to swap parts, well, then you got your project now. What's the story with the new one? Why no motor nor transmission?

And I would certainly check out the tie rods!

Good luck.

Greetings!
 
Old Jan 22, 2008 | 11:24 AM
  #8  
87_Crown_Vic's Avatar
Super Moderator
Joined: Jan 2008
Posts: 543
From: United States
Default

i would consider tie rod ends, pitman and idler arms getting replaced. how do the link pins look or are you gonna change those also?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
riri
Off Topic
0
Oct 13, 2013 04:32 PM
yanzy
Off Topic
0
Mar 22, 2013 08:30 PM
catriz
Off Topic
0
Feb 23, 2013 06:43 PM
87_Crown_Vic
Off Topic
13
Apr 27, 2012 07:09 AM
MercAdvisor
Off Topic
0
Feb 14, 2005 01:38 PM




All times are GMT -5. The time now is 01:57 AM.