New Member Area Are you new?? WELCOME! Check in, tell us about yourself and your ride...

1950 mercury need help

Thread Tools
 
Search this Thread
 
  #1  
Old 06-12-2011, 03:18 PM
streetracer's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 1
Default 1950 mercury need help

First off Im new here Hi everybody ,now my problem can anyone tell me where i might be able to find the chrome trim that goes on the fenders of a 1950 merc . It should be stamped with MERCURY 8 on it .I have the orginals but passenger side is a lil dinged up worse comes to worse ill straighten it as best as i can an use it but really hate to ive done so much to the car dont want one lil piece of trim to take away from it .Any help or suggestions of where to find or get refinished would be appericated. Thanks for reading
 
  #2  
Old 06-24-2011, 03:33 PM
MultipleMercMan's Avatar
Junior Member
Join Date: Jun 2011
Posts: 3
Default

Check out Ebay or a junkyard. With a car that old, you might be out of luck finding original parts. But you could always grab modern replacements, which I'm sure you could find chrome trim quite easily.
 
  #3  
Old 02-20-2013, 06:26 PM
johnnyreb1's Avatar
Junior Member
Join Date: Feb 2013
Posts: 1
Default old junk yards

Originally Posted by streetracer
First off Im new here Hi everybody ,now my problem can anyone tell me where i might be able to find the chrome trim that goes on the fenders of a 1950 merc . It should be stamped with MERCURY 8 on it .I have the orginals but passenger side is a lil dinged up worse comes to worse ill straighten it as best as i can an use it but really hate to ive done so much to the car dont want one lil piece of trim to take away from it .Any help or suggestions of where to find or get refinished would be appericated. Thanks for reading
You can try "The Old Car Guys.com. Look through the junk yard sections. I think they have a 50 mercury at Sonny Junkyard in Minnesotta. They have descent prices too.
 
  #4  
Old 05-13-2016, 04:00 PM
kjunio's Avatar
Junior Member
Join Date: May 2016
Posts: 1
Default Need Help Mercury 1950 power steering

My father in law has a mercury 1950 and at his age it’s became more difficult for him to drive because the steering bar it's very hard to make turns, he bought a power steering kit but the mechanic said that for him to be able to install he has to change the steering bar and this will take off the car's originality. Someone can let me know if it is possible to install the power steering kit without removing or changing the steering bar without taking the car's originality?
 

Last edited by kjunio; 05-16-2016 at 03:20 PM.
  #5  
Old 09-30-2016, 04:56 AM
Paul Bennett's Avatar
Junior Member
Join Date: Sep 2016
Posts: 1
Default

In general, originality isn't paramount except for the rare concours cars, which is to suggest ignoring that factor. If you do install a power setup simply retain all the old removed components. Secondly if I may be so bold, and my 80 years generally allows me to be, 'at his age' he should be visiting the gym or equivalent, as I do, and getting back his upper body strength as the benefits are more than just steering but he will appreciate the improvement throughout various other activities in his daily life as well.
 
  #6  
Old 02-04-2022, 11:57 AM
Jonboy's Avatar
Junior Member
Join Date: Feb 2022
Posts: 1
Default

Need help. Can someone please tell me the length of a driveshaft on a 51 mercury 2 door coupe with the overdrive transmission
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
50Coupe
Monterey
0
03-22-2015 03:36 PM
50Coupe
General Tech Help
0
03-22-2015 03:35 PM
mikemerc2
General Tech Help
0
12-14-2014 06:16 PM
mercoupe50
General Tech Help
0
02-23-2014 06:27 PM
mmenc
New Member Area
0
01-18-2007 09:35 PM



Quick Reply: 1950 mercury need help



All times are GMT -5. The time now is 02:02 PM.