New Member Area Are you new?? WELCOME! Check in, tell us about yourself and your ride...

Fender Trim?

Old Oct 2, 2009 | 08:52 PM
  #1  
91grandmarquis's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 7
Default Fender Trim?

I have a 1991 Grand Marquis GS. I bought the car and it was a rust pit the only reason I considered it was because it had only 36k on it, and as my first car I had my eye on an old Towncar or Grand Marquis. After a summers worth of body work, a week of wet sanding and paint she looked like new, well almost, I still needed to get a new vinyl roof and some missing trim. I assumed the roof would be the hard part but I was wrong. The car is done with only one thing missing, that being a set of wheel well opening trim. I have ordered it from aftermarket suppliers that claim it will fit, however it seems that the part was designed without looking at the car, and the dealers a no-go, even the body shop cant get it, so I am willing to pay some good money to anyone who could get me a set of 4. if you have a junk car with good trim or know of any place that makes reproductions I would be greatful to hear from you. It has been just over a year and this is the only thing not done on the car. I am out of New England. Any help is appreciated.
 
Old Oct 3, 2009 | 08:32 AM
  #2  
slymer's Avatar
Senior Member
Joined: Oct 2008
Posts: 1,361
From: United States
Default

check this site and see if they can get it. it's another dealer, but they have it listed. If the dealers up there said its' a discontinued item, then you'll have to source the parts out of a salvage yard or find someone who can and then ship them to you.
 
Old Oct 3, 2009 | 08:38 AM
  #3  
slymer's Avatar
Senior Member
Joined: Oct 2008
Posts: 1,361
From: United States
Default

also check automatrix for the parts. These are for an 88, but should fit the 91. I could be mistaken on that though.
 

Last edited by slymer; Oct 3, 2009 at 08:39 AM. Reason: fixed URL
Old Oct 4, 2009 | 09:08 AM
  #4  
91grandmarquis's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 7
Default

Thanks, there are not many scrapyards around were I am so I wanted to use that as a last resort, besides NH is the home of rusted cars so if i found them here they are probably gone, ill try the 88s they should fit if they are the right part.
 
Old Oct 4, 2009 | 10:19 AM
  #5  
87_Crown_Vic's Avatar
Super Moderator
Joined: Jan 2008
Posts: 543
From: United States
Default

79-91 Crown Vic, Grand Marquis stuff should work on your car... you can try ebay or i know people on the east coast also. many people on east coast i know hang out on www.grandmarq.net

i go by 87_crown_vic on that site too
 
Old Oct 5, 2009 | 04:02 PM
  #6  
91grandmarquis's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 7
Default

Originally Posted by 87_Crown_Vic
79-91 Crown Vic, Grand Marquis stuff should work on your car... you can try ebay or i know people on the east coast also. many people on east coast i know hang out on www.grandmarq.net

i go by 87_crown_vic on that site too
Yeah i am still in search of a set of 4 because all i can find that is in stock is the front pieces, if you know of anyone who may have some or a scrapyard near NH that a lot of your friends go to it would be much appreciated.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
landman
General Tech Help
0
Jan 24, 2013 03:06 PM
rreitz
Grand Marquis
2
Sep 4, 2011 06:39 PM
rickysee
Mountaineer
0
May 29, 2009 05:23 PM
fastback
Cougar
0
May 20, 2008 12:46 PM
Lifted00
Mountaineer
0
Oct 26, 2007 06:07 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:12 AM.