Villager Discuss the Mercury Villager here...

Villager hard start/stalling issues

Thread Tools
 
Search this Thread
 
  #1  
Old 06-23-2008, 07:53 PM
Charlie3's Avatar
Junior Member
Thread Starter
Join Date: Jun 2008
Location: United States
Posts: 1
Default



My 1995 villager has developed a hard start/stalling issue that only occurs when the engine has warmed up to operating temperature. During the hard start episodes, the engine does not seem to be getting any gas. I have replaced the following with the hopes of correcting the issue:


1) Fuel filter


2) Distributor cap and rotor


3) Spark plugs and wires


4) Ignition control module


Once the car cools down, it runs fine until it warms up again. Anyone have any ideas?
 
  #2  
Old 10-27-2008, 12:34 PM
jgolding's Avatar
Junior Member
Join Date: Oct 2008
Location: United States
Posts: 3
Default

Sorry, I see your post is older, but in case this helps anyone else...

I had a similar issue ( https://www.mercuryforum.com/forum_p...D=1656&PN= 1)

The local shop said this type of issue can be caused from the fuel pressure regulator going out. They said this is a very common problem.


 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
98mountianeer
Mountaineer
12
05-16-2016 06:39 AM
Mercury Villager 2000
General Tech Help
1
10-03-2011 11:41 PM
grandpagrandmarquis
Grand Marquis
0
11-14-2010 01:47 PM
luy123
New Member Area
0
06-10-2006 09:34 PM
marinodx13
Grand Marquis
0
05-25-2005 12:14 AM



Quick Reply: Villager hard start/stalling issues



All times are GMT -5. The time now is 05:15 PM.